實驗室紅外水分儀JZ-H-1000F
實驗室紅外線水份儀
JZ-H-1000F系列
一種更快速、準確、可靠的檢測方法
JZ-H-1000F是一種應用于實驗室水分快速測量的實驗室設備，采用近紅外線原理來實現10秒內物料含水率的快速檢測。實驗室紅外快速水分測定儀是由全新的設計理念、精湛的工藝技術打造而制成的，使用起來既方便又簡單，還易于觀察。它能迅速準確的測定物質水分的化驗儀器，廣泛用于食品、煙草、制藥、石油、造紙、飼料、化工、涂料等行業中實驗室需求。
特征：Features:
快速水分測定儀相比一般的實驗室測定儀優勢如下：
The advantages of rapid moisture analyzer over general laboratory analyzer are as follows:
1、水分測量范圍寬達0~99%，同時覆蓋傳統的高水分段和低水分段。
The range of moisture measurement is 0-99%, which covers both high and low water sections.
2、快速水分測定儀采用近紅外水份儀吸收率原理，測量速度快，不損傷物料。
The fast moisture analyzer adopts the absorption principle of near infrared moisture analyzer, which has the advantages of fast measurement speed and no damage to materials.
3、取樣盤帶有勻速轉盤，測量結果穩定準確，重復性好。
Sampling disc with a uniform rotating disc, the measurement results are stable and accurate, and good repeatability.
4、不需要稱重，無需計算。對使用操作要求不高，便捷式操作，只需一個按鍵就可測量出水分值。
No weighing, no calculation.The requirement of operation is not high. It is easy to operate. It only needs one key to measure the moisture value.
5、快速水分測定儀能測量品種廣泛，只要物料內外部水分均勻即可，滿足絕大多數用戶的使用要求。
Rapid moisture meter can measure a wide variety of materials, as long as the internal and external moisture is uniform, it can meet the use requirements of the vast majority of users.
技術參數 :Technicalparameters:
測量范圍 : 0.1%-99%（物料無滲水情況）
Measuring range: 0.1% 99% (material no water seepage conditions)
顯示分辨率 : 0.01%
Display resolution: 0.01%
測量精度 : ±0.2%（根據物料特性和應用環境而定）
Accuracy: plus or minus 0.2% (according to the material properties and the application environment and decide)
測量通道 : 10
Measurement channels: 10
環境溫度 : -20-50℃
Ambient temperature: -20 to 50 ℃
響應時間 : 1-60秒
Response time: 1 to 60 seconds
可選輸出 : 4-20MA/RS485/RS232/以太網/MODBUS RTU/二路開關量
Optional Output: 4-20 ma/RS485 / RS232 / Ethernet/MODBUS RTU/two-way switch
光干擾 : 不受外界環境光線變化影響，探頭無須遮光罩
Light interference, is not affected by the light environment, probe hood
溫度影響 : 具有溫度自動補償基本不受外界溫度變化的影響
Basic temperature effect: it has automatic temperature compensation is not affected by ambient temperature change
